T/E M.S.SLIPON FLANGE 2"

Table E (T/E) Mild Steel (M.S.) Slip-on Flange in a 2-inch (50 mm) size is a circular pipe fitting designed to slip over the end of a pipe and be welded in place. It typically costs between ₹75 to ₹300 per piece depending on the thickness and manufacturer specifications. [ Mild Steel (MS) Slip-On Flange 2-inch is a circular pipe connector that slides over the end of a 2-inch nominal pipe size (NPS) and is welded on both the inner and outer sides.

Product BreakdoAbbreviation (T/E): Often refers to Table E (a standard BS 10 flange specification popular in industrial and plumbing applications).

• Material (M.S.): Mild Steel (commonly grade IS 2062), offering good strength, weldability, and affordability for low-to-moderate pressure fluid or water lines.

• Type (Slip-On): The inner diameter of the flange is slightly larger than the outer diameter of the pipe, allowing it to "slip on" the pipe before fillet welding.

• Size (2"): Fits a 2-inch (50 NB / ~60.3 mm to 63 mm) nominal pipe diameter.

Key Specifications (Class 150 / Standard Reference)

• Nominal Size: 2 inch (DN 50)

• Flange Outside Diameter (OD): Approx. 152.4 mm (ASME Class 150) or standard Table E dimensions

• Flange Thickness: Typically ranges from 14 mm to 19.1 mm depending on the specific standard (such as commercial IS 2062 or ASME B16.5)

• Application: Used in water supply, low-pressure piping, and general industrial plumbing where alignment and bolt-up/bolt-down dismantling are required